A large number of irrigation PE pipes need to be used as the branch and main pipes of irrigation systems in all water-saving irrigation systems including the drip irrigation equipment and the sprinkler irrigation equipment. PE pipes of agricultural irrigation are required to have excellent air tightness and liquidity when they are installed. Then, the installation of irrigation PE pipes is also a matter that can not be ignored. It needs to be treated seriously and carefully. 

Irrigation PE pipes

1. Before the use of irrigation PE pipes, each pipe should be checked from the model, specifications, cleanliness and other aspects. It can only be used that the construction requirements of the project are met.

2. The tools of connecting the nozzle of irrigation PE pipes should be electric melting or hot melting with special tools according to the industry regulations, and the self-created methods like the open fire are not allowed.

3. For the irrigation PE pipes connected by melting method, the air tightness, toughness, hardness and other aspects should be tested after the connection is completed. And the pipe can be used after the connection is confirmed to be qualified. Special attention should be paid to the inspection after the fusion of irrigation PE pipes is completely cool. Do not move when the pipe is not cool. And you should avoid the damage caused by unstable combination of irrigation PE pipes.

Agricultural irrigation PE pipes

4. Before using different batches of PE pipes and fittings, they should be stored in the environment for some time and used at the same time so as to ensure that all irrigation PE pipes and fittings own the same physical and chemical properties.

5. In case of the construction in the environment with low temperature, high temperature, rain, snow or gale, some protective measures should be taken for irrigation PE pipes or the construction method should be adjusted. If necessary, the construction can be abandoned and carried out on another day.

6. During the connection with irrigation PE pipes, attention should be paid to keep each pipe orifice smooth and clean. When unused PE pipes are stored at the construction site, the plugs at both ends should be plugged to prevent foreign matters from entering.

7. After the PE pipe is connected, you should check it according to the requirements in order to ensure that the requirements can be met by the parameters of the two parts of the PE pipe. After that, the construction can be continued.

The above items are the simple notes for the installation of agricultural irrigation PE pipes. If you have any questions about drip irrigation equipment, sprinkler irrigation equipment and other water-saving irrigation equipment, you can consult us. We can provide you with samples of various products. Thank you for your reading.